Jersey Scarf

In addition to the knitting needle case for Adam, I also had this jersey material I had pictured making into a cozy, cozy scarf because he is known to wear a scarf as his signature wardrobe piece.

While I love the finished product, I must confess this project was not as easy or fun to make as I thought it would be. I have not worked much with stretchy fabric and I am not sure if it's the thread I chose, the stitch I used or what but the thread kept breaking as I was sewing and it became tedious to repeatedly re-thread the machine. Luckily, Adam looks smashing in the scarf and it all worked out in the end.

I had 2 jersey fabrics - one solid and one striped. The scarf is reversible and where there is a striped piece, it is backed by a solid and vice versa. The finished scarf measures about 95 inches long and 12-14 inches wide. It's huge but allows for two full wraps around the neck and with the double layer of fabric Adam has reported it passes the cozy test! A good reminder that a challenging project is often worth the perseverance in the end.

My scarf is done!

You all saw when I had started this scarf - and it's been done for a week but I hadn't gotten around to blogging about it yet :)

Here it is.

It's gotten pretty chilly here the past couple days...and thankfully it is very warm. I had to buy another ball of the yarn to finish it off, and there is lots leftover so maybe I'll also work on mittens to match the set.

Knitting Needle Case

Happy Birthday Adam!

This gift was inspired by a knitting needle case I owned - I really wanted to make one for my friend Adam and was sure I could figure out how.
There is a pattern in Stitch and Bitch and originally I had cut out the fabric to make this one - but I was having a hard time visualizing how the pattern all came together as I thought the instructions were vague. So instead, I created my own pattern. And here it is.

Supplies:
2 pieces of fabric 20 inches long x 13 inches wide (I used 2 pieces of the same fabric, yours do not need to be)
1 piece of fabric 17 inches long x 13 inches wide
Ribbon - somewhere between 26-32 inch should be enough
Sewing machine, Pins, Taylor chalk

Here's how it all goes together:
1. Take your piece of fabric that is 17x 13 and fold it in half lengthwise so it is 8.5 inches long. Iron the fold.
2. With the open fold at the bottom, line it up with one of the 20x13 pieces (right side up). Pin it in place.

3. Draw the lines to create your knitting needle pockets. I made 10 pockets that were each about 1 inch wide. Conveniently, this is the width of my ruler, so it made it very easy to draw them on.

4. Sew along these lines - with all 3 layersof fabric together.

5. Now, make it so that the two 20x13 pieces are right sides together and pin around the edge.

6. Pin your ribbon into place (sorry there is not a good photo of this step). Fold it in half  and place it at one side, in the middle of the fabric. Pin it so that the length of the ribbon in sandwiched between the two piecs. (In these photos, the ribbon is a little higher than you may want it, I recommend putting it lower - I actually remade this one and modified it but did not take a photo)
7. Sew around but leave a 4-6 inch spot on the side open (or anywhere you want, but I chose the side) so that you can turn it right side out.
8. Before turning this right side out - I would suggest trimming any excess fabric that is around the edges - this makes for neater corners.
9. Turn right side out and using a sharp object (pencil, knitting needle) press out the corners and make them look like true corners.

10. Top stitch around the whole edge of the case, as close to the edge as you can comfortably get. The corners where there are many layers of fabric will be tricky - go slow and make sure your machine keeps on moving. Also make sure you are closing up the seam that you left open in order to turn it right side out.

11. You now need to make the flap that folds down at the top and makes sure the needles don't slide out. Place a knitting needle (preferably your tallest one) in the case, and then fold down the fabric - leaving maybe 3/4 or 1 inch of space at the top. Iron this fold and then sew a straight line across the top (with it folder down). This will make it stay in place easier.

12. You're done! Fill up the case and enjoy :)

Wordless Wednesday: An exciting addition to my crafts!!



Something for Me

After making Dave's hat last week I thought it was time I finally used the yarn I bought over a year ago to make myself a hat and scarf.

The hat only took me 4 hours to make and I did it in one evening! Using this pattern and James C. Brett Marble Chunky yarn here is what I got:

I wore the hat for a couple days and realized it was a bit breezy around the ears. Considering it's not even snowy here yet and it will get a lot colder as the winter goes on I thought some modifications needed to be made. Here's my addition to the pattern :



I sewed a band of sweatshirt material into the base of the hat - and now it is so toasty warm!

I am loving the hat and have already received so many compliments. The pattern's a keeper.

I couldn't decide what scarf pattern to do - but after trying a few things I have settled on good old ribs and here's the start of it.

My new accessories make me almost excited for the cold weather to come! 



Blanket Binding Tutorial

I was excited to learn how to put the silk binding on a baby blanket as I really love the look of it. Through some trial and error I have finally figured it out and am pretty pleased with the product. So I thought I'd share my step-by-step method. While I had found some how-to stuff online - I might have appreciated some more details. Hopefully this will help someone else out.

1. Sew your two places of flannel or whatever fabric you've chosen together. I typically use a yard each of coordinating flannels. Be sure to iron them first.

2. Somewhere I read about doing a zig-zag stitch in addition to the straight stitch to put the two together. I am not sure what this is about but I do believe it makes things a bit sturdier.

3. I did not photograph this part, but iron your blanket binding - it will take a few moments but you'll be happy you did.

4. Make sure you have a thread colour that matches your binding. I made the mistake of trying to use a contrasting colour and instead it just showed all my mistakes. I ripped it out and had to buy new binding to do it again.

5. This part took me a bit to figure out and it may not be perfected yet. Start sewing the binding on close to the corner. You will use a zig zag stitch to sew the binding on. Most bindings have one side that is longer than the other (I have noticed that some I've bought do not have as noticable a difference). If you notice that one side is longer - put it at the back. That way it will always catch the stitch as long as you stay straight on the front.

6. Then I folded it to start the other edge. 

7. Pin all the way down the side. I found that lots of pins close together makes it a bit easier to sew. (I forgot to take a photo of this step with the pink binding, so here you see an older blanket).

8. Sew along the edge, all the way to the end.

 

9. Fold your corner like this (below). Then pin all the way down the side like in step 7 and sew like in step 8. Repeat until each side is sewn on. 

 

10. Go back to your corner and zig-zag stitch to hold it all together. This may be an unnecessary step but I was imagining little fingers getting stuck in the folds otherwise. I kind of like how it looks.

11. Finishing the final corner is probably the trickiest part, and I've only done it once so far as I had a different method for the first few blankets I did. This was hard to photograph and so may be harder to explain but basically you want to trim the binding and fold it appropriately to try and make it match the other corners. Using an iron to make the folds stay better before pinning and sewing really does help.

And there you go - you have a completed blanket!! Here are the two I made this weekend:

If I've missed anything or you have any questions - let me know!

The Fiancé Hat

I know I just wrote about Dave getting a hat not too long ago, but that hat was made a year ago now. And it seems to have become a tradition that I knit him a hat each year - so before I got going on any more baby projects (or perhaps a hat/scarf for myself), I thought I'd give Dave another option for keeping his ears warm. Winter has barely started and Dave already wears a hat everyday, so I'm happy for him to have one more home made one to choose from.

The name for this post comes from the original pattern name - The Boyfriend Hat. I used this pattern except knit it longer (7inches before I started decreasing) in an attempt to cover his ears - I was almost successful! I think as he wears it and it stretches a little, it will fit perfectly, but for now he may have to keep tugging it to cover his entire ears. I also CO 110 stitches instead of 100 - which worked out fine with the decreases for the crown. I used 4.5mm needles - I tried 5mm and the gauge seemed too loose.

I used Patons Classic Wool in Forest - of course it had to match the scarf I worked so hard on so I was sticking to the green/brown colours.

Here it is:

And the back:

The project went together much faster than I thought - I was motivated to have it done for Fibers on Friday and I am surprised it's Wednesday and I'm done.

Thanks to Stephanie for such a great pattern!